Friday, July 24, 2020

Almost ready to attempt IML (boot up) of my IBM 3174 controller

WAITING ON POWER CABLE ADAPTER FOR THE GOTEK EMULATOR BOX

The Gotek emulator box has the form factor of a 3.5" floppy drive, thus it is connected via a 34 pin IDC signal connector and a small 4 pin power connector. The 3174, on the other hand, uses 5.25" floppy drives which use a PCB card edge connector for signals and a 4 pin Molex power connector. I had ordered and received an adapter between IDC and card edge, thus solving the signal connectivity.

Alas, the existing adapter for power that I own has the proper small 4 pin female connector but the larger Molex side is female. Well, so is the power cable from the 3174. A new cable is on its way with the proper genders for both sides, but it won't be here until Monday and I am eager to go today. 

No comments:

Post a Comment